Our Sytmhoe Sensor Outdoor Wall Lights do not have an external motion sensor. Its sensor module has been fabricated into a chip that is embedded in a power supply.

Then, regarding the lighting mode, the sensing range of the light is 3-5 meters.

A. When the ambient light is insufficient, the light will be 100% bright when the person enters the sensing range. When people walk out of this range for about 30 seconds, the light will automatically go out. (Figure 3.,3)

B. When the ambient light is sufficient (daylight), the light will automatically go out. (The light will remain off even when the person enters the sensing range.) (Figure 2)

Note: In a dark environment, when people enter the sensing range, after the light is on, if the ambient light is suddenly sufficient (for example, the night turns into the day), it takes about 30 seconds for the light to go out.

Our Sytmhoe Sensor Outdoor Wall Lights do not have an external motion sensor. Its sensor module has been fabricated into a chip that is embedded in a power supply.

Then, regarding the lighting mode, the sensing range of the light is 3-5 meters.

A. When the ambient light is insufficient, the light will be 100% bright when the person enters the sensing range. When people walk out of this range for about 30 seconds, the light will automatically go out. (Figure 3.,3)

B. When the ambient light is sufficient (daylight), the light will automatically go out. (The light will remain off even when the person enters the sensing range.) (Figure 2)

Note: In a dark environment, when people enter the sensing range, after the light is on, if the ambient light is suddenly sufficient (for example, the night turns into the day), it takes about 30 seconds for the light to go out.

Our Sytmhoe Sensor Outdoor Wall Lights do not have an external motion sensor. Its sensor module has been fabricated into a chip that is embedded in a power supply.

Then, regarding the lighting mode, the sensing range of the light is 3-5 meters.

A. When the ambient light is insufficient, the light will be 100% bright when the person enters the sensing range. When people walk out of this range for about 30 seconds, the light will automatically go out. (Figure 3.,3)

B. When the ambient light is sufficient (daylight), the light will automatically go out. (The light will remain off even when the person enters the sensing range.) (Figure 2)

Note: In a dark environment, when people enter the sensing range, after the light is on, if the ambient light is suddenly sufficient (for example, the night turns into the day), it takes about 30 seconds for the light to go out.

Our Sytmhoe Sensor Outdoor Wall Lights do not have an external motion sensor. Its sensor module has been fabricated into a chip that is embedded in a power supply.

Then, regarding the lighting mode, the sensing range of the light is 3-5 meters.

A. When the ambient light is insufficient, the light will be 100% bright when the person enters the sensing range. When people walk out of this range for about 30 seconds, the light will automatically go out. (Figure 3.,3)

B. When the ambient light is sufficient (daylight), the light will automatically go out. (The light will remain off even when the person enters the sensing range.) (Figure 2)

Note: In a dark environment, when people enter the sensing range, after the light is on, if the ambient light is suddenly sufficient (for example, the night turns into the day), it takes about 30 seconds for the light to go out.

For Using the 3-color changeable lamp, you need to use it with the switch on your wall. After you connect the wire, turn on the switch for the first time, it will be light with warm white color, turn it off and then turn it on again, it will change the second color cold-white color. Turn it off and then turn it on the third time, it will be lighting nature white color. It will cycle the light color if you turn the switch to continue (Figure 7, 8, 9 )

PLS Note (product advantages):
1. This lamp can memory color temperature, if you want to choose one color to use, you just turn off the switch for more than 5-10 seconds, when you turn on it again, the lamp will automatically remember your last color temperature.
2. Electric Hard-wired, Two installation methods, you can install with US standard powerbox, or you can install with four-hole positioning and drilling hole in the wall.
3. Without a motion sensor and dimmable function, if you need a motion sensor and dimmable function wall light, please contact us on the chat window, or directly Email us: cy@sytmhoeled.com

For Using the 3-color changeable lamp, you need to use it with the switch on your wall. After you connect the wire, turn on the switch for the first time, it will be light with warm white color, turn it off and then turn it on again, it will change the second color cold-white color. Turn it off and then turn it on the third time, it will be lighting nature white color. It will cycle the light color if you turn the switch to continue (Figure 7, 8, 9 )

PLS Note (product advantages):
1. This lamp can memory color temperature, if you want to choose one color to use, you just turn off the switch for more than 5-10 seconds, when you turn on it again, the lamp will automatically remember your last color temperature.
2. Electric Hard-wired, Two installation methods, you can install with US standard powerbox, or you can install with four-hole positioning and drilling hole in the wall.
3. Without a motion sensor and dimmable function, if you need a motion sensor and dimmable function wall light, please contact us on the chat window, or directly Email us: cy@sytmhoeled.com